Designers of the original Alimats®, Stacker Packers and Hole Covers, revolutionising the UK construction industry

pole-drill-page-banner

SITE SAFETY: OVERHEAD DRILLING

THE PROBLEM
To drill a hole in the ceiling of a building requires the operative to usually work off a ladder or tower scaffold to be able to mark and drill the hole. This means the operatives are working at height, drilling above their heads being directly exposed to hand vibration, noise, dust and even sometimes water.

THE SOLUTION
Our Pole Drilling System allows holes to be marked, drilled, raw plugged and filled from floor level. The system comprises of a foot pedal on a lightweight extendable pole which different accessories can be attached to. The first attachment can mark where the hole needs drilling. The second consists of a standard SDS drill, which attaches to the end of the pole. The drill is turned on/off via a handle at waist level and is pushed upwards via the pole’s foot pedal. The system has a built in wet/dry vacuum system to suck away any dust at the drill source. Different accessories can be attached to the pole to place raw plugs directly into the hole.

HIRE POLE DRILLING SYSTEM
ENQUIRE
Safety Trailer Mats
TRAILER MATS
LARGE HOLE COVER
SMALL HOLE COVER
POLE DRILLING SYSTEM
TOWER TRUCK

RECENT TWEETS